Call Forwarding Parameters - AudioCodes Mediant 800B User Manual

Gateway & enterprise sbc (e-sbc)
Hide thumbs Also See for Mediant 800B:
Table of Contents

Advertisement

User's Manual
Parameter
72.11.5.3

Call Forwarding Parameters

The call forwarding parameters are described in the table below.
Parameter
Enable Call Forward
configure voip > gateway
dtmf-supp-service supp-
service-settings > call-
forward
[EnableForward]
Call Forwarding Table
Call Forwarding Table
configure voip > gateway
analog call-forward
[FwdInfo]
Version 7.2
INFO sip:06@192.168.13.2:5060 SIP/2.0
Via:SIP/2.0/UDP
192.168.13.40:5060;branch=z9hG4bK040066422630
From:
<sip:4505656002@192.168.13.40:5060>;tag=1455352915
To: <sip:06@192.168.13.2:5060>
Call-ID:0010-0008@192.168.13.2
CSeq:342168303 INFO
Content-Length:28
Content-Type:application/broadsoft
play tone CallWaitingTone1
Table 72-46: Call Forwarding Parameters
Enables call forwarding.
[0] Disable
[1] Enable (Default)
For FXS interfaces, the Call Forward table (FwdInfo parameter) must be
configured to use the Call Forward feature. The device uses SIP REFER
messages for call forwarding.
Note:
To use this service, the devices at both ends must support call
forarding.
For the device to respond to SIP 3xx responses with a new SIP
request (forwarding the original request), configure the parameter to
Enable.
Defines call forwarding of IP-to-Tel calls (using SIP 302 response) to
other device ports or an IP destination, based on the device's port to
which the call was originally routed.
The format of the ini file table parameter is as follows:
[FwdInfo]
FORMAT FwdInfo_Index = FwdInfo_Type, FwdInfo_Destination,
FwdInfo_NoReplyTime, FwdInfo_Module, FwdInfo_Port;
[\FwdInfo]
Where,
Module = Module number, where 1 denotes the module in Slot 1.
Port = Port number, where 1 denotes Port 1 of a module.
For example:
Below configuration forwards calls originally destined to Port 1 of
Module 1 to "1001" upon On Busy:
FwdInfo 0 = 1,1001,30,1,1;
Below configuration forwards calls originally destined to Port 2 of
1195
72. Configuration Parameters Reference
Description
Description
Mediant 800B Gateway & E-SBC

Advertisement

Table of Contents
loading

Table of Contents