AudioCodes Mediant 800B User Manual page 286


To configure the Proxy and registration parameters:
1. Open the Proxy & Registration page (Configuration tab > VoIP menu > SIP
Definitions > Proxy & Registration).
2. Configure the parameters as required.
3. Click Submit.

To register or un-register the device to a Proxy/Registrar:

Click the Register button to register.

Click Un-Register button to un-register.
Instead of registering the entire device, you can register specific entities as listed below by
using the Register button located on the page in which these entities are configured:

FXS/FXO endpoints, BRI endpoints, Trunk Groups - Trunk Group Table page (see
Configuring Trunk Group Table on page 351)

Accounts - Account table (see ''Configuring Registration Accounts'' on page 281)
Click the Proxy Set Table
groups of proxy addresses. Alternatively, you can open this page from the Proxy Sets
Table page item (see ''Configuring Proxy Sets'' on page
User's Manual
Mediant 800B Gateway and E-SBC
button to Open the Proxy Sets Table page to configure
274
286
for a description of this page).
Document #: LTRT-10286