Technical Specifications - AudioCodes Mediant 800B User Manual

User's Manual
58

Technical Specifications

The device's technical specifications are listed in the table below.
Notes:
•
All specifications in this document are subject to change without prior notice.
•
The compliance and regulatory information can be downloaded from AudioCodes
Web site at http://www.audiocodes.com/library.
Function
Telephony Interfaces
Analog
Digital
Clock Source
Networking Interfaces
Ethernet
High Availability (HA)
Full HA
OSN Server Platform (Optional)
Single Chassis Integration
Memory
Storage
Security
Access Control
VoIP Firewall
Encryption and
Authentication
Privacy
Traffic Separation
Version 6.8
Table 58-1: Technical Specifications

4/8/12 FXS ports (RJ-11 ports)

4/8/12 FXO ports (RJ-11 ports)
Note: The device is an indoor unit and thus, the device and these
interfaces must be installed only indoors.

ISDN BRI: 4/8 BRI ports, network S/T interfaces, NT or TE
termination (RJ-49c ports); 2W per port (power supplied). The
maximum cable length for a point-to-point BRI service (BRI port to
BRI endpoint) is 1,000 m (3,280 ft).

ISDN PRI: 1/2 E1/T1 spans (RJ-48c ports)
5 ppm High Precision
4 GE / 4 GE + 8 FE interfaces, configured in 1+1 redundancy or as
individual ports
Two deployed devices for 1+1 high availability, communicating
through a Maintenance network interface. Upon failure of the active
device, all functionality is switched over to the redundant device.
Embedded, open Network Solution Platform for third-party services
Up to 16 GB RAM
HDD or SDD
DoS/DDoS line rate protection, bandwidth throttling, Dynamic
Blacklisting
RTP pinhole management, Rogue RTP detection and prevention,
SIP message policy
TLS, SRTP, HTTPS, SSH, Client/Server SIP Digest authentication,
RADIUS Digest
Topology Hiding, User Privacy
VLAN/physical interface separation for multiple Media, Control and
OAMP interfaces
997
58. Technical Specifications
Specification
Mediant 800B Gateway and E-SBC