AudioCodes Mediant 800B User Manual page 54

Analog & digital voip media gateway
Hide thumbs Also See for Mediant 800B:
Table of Contents

Advertisement

In addition to the color-coded status information depicted on the graphical display of the
device, the Home page displays various read-only information in the General Information
pane:
IP Address: IP address of the device
Subnet Mask: Subnet mask address of the device
Default Gateway Address: Default gateway used by the device
Digital Port Number: Number of digital PRI ports (depending on ordered hardware
configuration)
BRI Port Number: Number of BRI ports (depending on ordered hardware
configuration))
Analog Port Number: Number of analog (FXS and FXO) ports (depending on
ordered hardware configuration)
Firmware Version: Software version running on the device
Protocol Type: Signaling protocol currently used by the device (i.e. SIP)
Gateway Operational State:
"LOCKED": device is locked (i.e. no new calls are accepted)
"UNLOCKED": device is not locked
"SHUTTING DOWN": device is currently shutting down
To perform these operations, see ''Basic Maintenance'' on page 581.
High Availability: Status of the device's HA mode (see HA Status on the Home Page
on page 567).
The table below describes the areas of the Home page.
Item #
1
Displays the highest severity of an active alarm raised (if any) by the device:
Green = No alarms
Red = Critical alarm
Orange = Major alarm
Yellow = Minor alarm
To view active alarms, click the Alarms area to open the Active Alarms page (see
Viewing Active Alarms on page 651).
2
Module slot number.
3
Module interface type (e.g., FXS, FXO, and DIGITAL).
4
Module status icon:
(green): Module has been inserted or is correctly configured
(gray): Module was removed and "Reserved" is displayed
(red): Module failure and "Failure" is displayed
5
Port (trunk or channel) status icon.
Icon
User's Manual
Table 6-7: Home Page Description
Description
Trunk Description
(Digital Module)
Disable: Trunk not
configured (not in use)
54
Mediant 800B Gateway and E-SBC
Channel Description
(Analog Modules)
Idle: Channel is currently on-hook
Document #: LTRT-10286

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents