User's Manual
Parameter
Tel Profile Table
Web: Tel Profile Settings
EMS: Protocol Definition >
Telephony Profile
CLI: configure voip >
coders-and-profiles tel-
profile
[TelProfile]
56.9
Channel Parameters
This subsection describes the device's channel parameters.
56.9.1 Voice Parameters
The voice parameters are described in the table below.
Version 6.8
IpProfile_SBCUserRegistrationTime,
IpProfile_ResetSRTPStateUponRekey, IpProfile_AmdMode,
IpProfile_SBCReliableHeldToneSource, IpProfile_GenerateSRTPKeys,
IpProfile_SBCPlayHeldTone, IpProfile_SBCRemoteHoldFormat,
IpProfile_SBCRemoteReplacesBehavior,
IpProfile_SBCSDPPtimeAnswer, IpProfile_SBCPreferredPTime,
IpProfile_SBCUseSilenceSupp, IpProfile_SBCRTPRedundancyBehavior,
IpProfile_SBCPlayRBTToTransferee, IpProfile_SBCRTCPMode,
IpProfile_SBCJitterCompensation,
IpProfile_SBCRemoteRenegotiateOnFaxDetection,
IpProfile_JitterBufMaxDelay;
[\IPProfile]
For a description of this table, see ''Configuring IP Profiles'' on page 304.
This table parameter configures the Tel Profile table. Each Tel Profile ID
includes a set of parameters (which are typically configured separately
using their individual, "global" parameters). You can later assign these
Tel Profile IDs to other elements such as in the Trunk Group
TableEndpoint Phone Number table (TrunkGroup parameter). Therefore,
Tel Profiles allow you to apply the same settings of a group of
parameters to multiple channels, or apply specific settings to different
channels.
The format of the ini file table parameter is as follows:
[TelProfile]
FORMAT TelProfile_Index = TelProfile_ProfileName,
TelProfile_TelPreference, TelProfile_CodersGroupID,
TelProfile_IsFaxUsed, TelProfile_JitterBufMinDelay,
TelProfile_JitterBufOptFactor, TelProfile_IPDiffServ,
TelProfile_SigIPDiffServ, TelProfile_DtmfVolume, TelProfile_InputGain,
TelProfile_VoiceVolume, TelProfile_EnableReversePolarity,
TelProfile_EnableCurrentDisconnect, TelProfile_EnableDigitDelivery,
TelProfile_EnableEC, TelProfile_MWIAnalog, TelProfile_MWIDisplay,
TelProfile_FlashHookPeriod, TelProfile_EnableEarlyMedia,
TelProfile_ProgressIndicator2IP, TelProfile_TimeForReorderTone,
TelProfile_EnableDIDWink, TelProfile_IsTwoStageDial,
TelProfile_DisconnectOnBusyTone, TelProfile_EnableVoiceMailDelay,
TelProfile_DialPlanIndex, TelProfile_Enable911PSAP,
TelProfile_SwapTelToIpPhoneNumbers, TelProfile_EnableAGC,
TelProfile_ECNlpMode, TelProfile_DigitalCutThrough,
TelProfile_EnableFXODoubleAnswer, TelProfile_CallPriorityMode;
[\TelProfile]
For a description of this parameter, see Configuring Tel Profiles on page
301.
823
56. Configuration Parameters Reference
Description
Mediant 800B Gateway and E-SBC