Searching For Configuration Parameters - AudioCodes Mediant 800B User Manual

6.1.7

Searching for Configuration Parameters

You can locate the exact Web page on which a specific parameter appears, by using the
Search feature. To search for a Web parameter, you must use the ini file parameter name
as the search key. The search key can include the full parameter name (e.g.,
"EnableSyslog") or a substring of it (e.g., "sys"). If you search for a substring, all
parameters containing the specified substring in their names are listed in the search result.

To search for a parameter:
1. On the Navigation bar, click the Search tab; the Search engine appears in the
Navigation pane.
2. In the field alongside the Search button, enter the parameter name or a substring of
the name for which you want to search. If you have done a previous search for such a
parameter, instead of entering the required string, you can use the 'Search History'
drop-down list to select the string saved from a previous search.
3. Click Search; a list of found parameters based on your search key appears in the
Navigation pane. Each searched result displays the following:
•
ini file parameter name
•
Link (in green) to the Web page on which the parameter appears
•
Brief description of the parameter
•
Menu navigation path to the Web page on which the parameter appears
4. In the searched list, click the required parameter (green link) to open the page on
which the parameter appears; the relevant page opens in the Work pane and the
searched parameter is highlighted in the page for easy identification, as shown in the
figure below:
Item #
1 Search field for entering search key and Search button for activating the search
process.
2
Search results listed in Navigation pane.
User's Manual
Figure 6-12: Searched Result Screen
Table 6-5: Search Description
Description
50
Mediant 800B Gateway and E-SBC
Document #: LTRT-10286