AudioCodes Mediant 800B User Manual page 523

User's Manual
You can also use Allowed Audio Coders Groups to configure Extension coders. Extension
coders are coders (listed in the Allowed Audio Coders Group) which the device adds to the
SDP offer. For more information on Extension coders, see Coder Transcoding on page
497.
The order of appearance of the coders listed in the Allowed Audio Coders Group
determines the priority (preference) of the coders in the SDP offer. The device arranges the
SDP offer's coder list according to their order in the Allowed Audio Coders Group. The
priority is in descending order, whereby the first coder in the list is given the highest priority
and the last coder, the lowest priority. If Extension coders are also used, these coders can
be added after the Allowed coders or arranged with the Allowed coders according to their
appearance in the Allowed Coders Group. For more information, see ''Prioritizing Coder
List in SDP Offer'' on page 499.
The following procedure describes how to configure Allowed Audio Coder Groups in the
Web interface. You can also configure Allowed Audio Coder Groups using the table ini file
parameter, AllowedCodersGroup or CLI command, configure voip > sbc allowed-coders-
group group-0.

To configure an Allowed Coders Group:
1. Open the Allowed Audio Coders Group page (Configuration tab > VoIP menu > SBC
> Allowed Audio Coders Group).
2. Configure an Allowed Audio Coders Group according to the parameters described in
the table below.
3. Click Submit, and then reset the device with a save ("burn") to flash memory.
Table 29-2: Allowed Audio Coders Group Table Parameter Descriptions
Parameter
Allowed Coders Group ID
[AllowedCodersGroupX]
Version 6.8
Figure 29-4: Allowed Audio Coders Group Page
Defines an index number for the new table record.
Description
523 Mediant 800B Gateway and E-SBC
29. SBC Configuration