AudioCodes Mediant 800B User Manual page 275

User's Manual

To configure a Proxy Set:
1. Open the Proxy Sets Table page (Configuration tab > VoIP menu > VoIP Network >
Proxy Sets Table).
2. Configure a Proxy Set according to the parameters described in the table below.
3. Click Submit, and then save ("burn") your settings to flash memory.
Parameter
Web: Proxy Set ID
EMS: Index
CLI: configure voip > voip-
network proxy-set
[ProxySet_Index]
Proxy Address
CLI: voip-network proxy-ip >
proxy-address
[ProxyIp_IpAddress]
Transport Type
CLI: voip-network proxy-ip >
transport-type
[ProxyIp_TransportType]
Version 6.8
Figure 17-6: Proxy Sets Table Page
Table 17-6: Proxy Sets Table Parameter Description
Defines an index number for the new table record.
Defines the address of the Proxy server. Up to 10 addresses can be
configured per Proxy Set.
The address can be defined as an IP address in dotted-decimal
notation (e.g., 201.10.8.1) or FQDN. You can also specify the port in
the following format:

IPv4 address: <IP address>:<port> (e.g., 201.10.8.1:5060)

IPv6 address: <[IPV6 address]>:<port> (e.g.,
[2000::1:200:200:86:14]:5060)
Defines the transport type for communicating with the Proxy server.

[0] UDP

[1] TCP

[2] TLS

[-1] = Undefined
Note: If this parameter is not defined, the settings of the global
parameter SIPTransportType is used.
Description
275 Mediant 800B Gateway and E-SBC
17. Control Network