AudioCodes Mediant 800B User Manual page 487

User's Manual
♦
•
REGISTER dialogs:
♦
♦
Note:
URL in the incoming SIP request. This is done in the IP Group table using the 'Source
URI Input' parameter.
2. Classifying incoming SIP dialog-initiating requests to a source IP Group: The
classification identifies the incoming SIP dialog request as belonging to a specific IP
Group (from where the SIP dialog request originated). For more information, see
''Configuring Classification Rules'' on page 525.
3. SBC IP-to-IP routing: The device routes the call to a destination that can be
configured to one of the following:
•
Registered user Contact listed in the device's database (only for User-type IP
Groups).
•
IP Group - the destination is the address configured for the Proxy Set associated
with the IP Group (allows redundancy/load balancing).
•
Specified destination address (can be based on IP address, host name, port,
transport type, and/or SRD). Routing to a host name can be resolved using
NAPTR/SRV/A-Record.
•
Request-URI of incoming SIP dialog initiating requests.
•
ENUM query.
•
Hunt Group - used for call survivability.
•
IP address (in dotted-decimal notation or FQDN - NAPTR/SRV/A-Record
resolutions) according to a specified Dial Plan index listed in the loaded Dial Plan
file.
•
LDAP server or LDAP query result.
For more information, see ''Configuring SBC IP-to-IP Routing Rules'' on page 532.
4. Manipulating SIP URI user part (source and destination) of inbound and/or
outbound SIP dialog requests: You can configure rules for manipulating the SIP URI
user part (source and destination) on the inbound and/or outbound leg. For more
information, see ''SBC Manipulations'' on page 543.
5. SIP message manipulations: You can configure SIP message manipulation rules
that can add, remove, and/or modify SIP headers and parameters. For more
information, see ''Configuring SIP Message Manipulation'' on page 288.
Version 6.8
Destination URL: The destination URL is obtained from the Request-URI.
Source URL: The source URL is obtained from the To header.
Destination URL: The destination URL is obtained from the Request-URI.
You can determine the SIP header from where the device obtains the source
487 Mediant 800B Gateway and E-SBC
28. SBC Overview