Standalone Survivability Parameters - AudioCodes Mediant 800B User Manual

Parameter
IP to IP Outbound Manipulation Table
Web: IP to IP Outbound
Manipulation
EMS: IP to IP Outbound
Manipulation
CLI: configure voip > sbc
manipulations ip-outbound-
manipulation
[IPOutboundManipulation]

56.12 Standalone Survivability Parameters

The Stand-alone Survivability (SAS) parameters are described in the table below. For a
detailed description of SAS, refer to the SAS Configuration Guide.
Parameter
Web: Enable SAS
EMS: Enable
CLI: enable-sas
User's Manual
IPInboundManipulation_SrcHost,
IPInboundManipulation_DestUsernamePrefix,
IPInboundManipulation_DestHost,
IPInboundManipulation_RequestType,
IPInboundManipulation_RemoveFromLeft,
IPInboundManipulation_RemoveFromRight,
IPInboundManipulation_LeaveFromRight,
IPInboundManipulation_Prefix2Add,
IPInboundManipulation_Suffix2Add;
[\IPInboundManipulation]
For a detailed description of this table, see ''Configuring IP-to-
IP Inbound Manipulations'' on page 545.
This table parameter configures the IP to IP Outbound
Manipulation table. This table allows you to manipulate the SIP
URI user part (source and/or destination) of the outbound SIP
dialog message. The format of the ini file table parameter is as
follows:
FORMAT IPOutboundManipulation_Index =
IPOutboundManipulation_ManipulationName,
IPOutboundManipulation_IsAdditionalManipulation,
IPOutboundManipulation_SrcIPGroupID,
IPOutboundManipulation_DestIPGroupID,
IPOutboundManipulation_SrcUsernamePrefix,
IPOutboundManipulation_SrcHost,
IPOutboundManipulation_DestUsernamePrefix,
IPOutboundManipulation_DestHost,
IPOutboundManipulation_RequestType,
IPOutboundManipulation_ReRouteIPGroupID,
IPOutboundManipulation_Trigger,
IPOutboundManipulation_ManipulatedURI,
IPOutboundManipulation_RemoveFromLeft,
IPOutboundManipulation_RemoveFromRight,
IPOutboundManipulation_LeaveFromRight,
IPOutboundManipulation_Prefix2Add,
IPOutboundManipulation_Suffix2Add,
IPOutboundManipulation_PrivacyRestrictionMode;
For a detailed description of this table, see ''Configuring IP-to-
IP Outbound Manipulations'' on page 548.
Table 56-72: SAS Parameters
Enables the Stand-Alone Survivability (SAS) feature.

[0] Disable (default)

[1] Enable
974
Mediant 800B Gateway and E-SBC
Description
Description
Document #: LTRT-10286