AudioCodes Mediant 800B User Manual page 895

User's Manual
Parameter
Version 6.8
56. Configuration Parameters Reference
Description
Channel Identification IE to explicit Interface ID,
even if the B-channel is on the same trunk as the
D-channel.
Note: This value is applicable only to 4/5ESS,
DMS and NI-2 variants.

[32768] ACCEPT MU LAW =Mu-Law is also
accepted in ETSI.

[65536] EXPLICIT PRES SCREENING = The
calling party number (octet 3a) is always present
even when presentation and screening are at
their default.
Note: This option is applicable only to ETSI, NI-2,
and 5ESS.

[131072] STATUS INCOMPATIBLE STATE =
Clears the call on receipt of Q.931 Status with
incompatible state. Otherwise, no action is taken
(default).

[262144] STATUS ERROR CAUSE = Clear call
on receipt of Status according to cause value.

[524288] ACCEPT A LAW =A-Law is also
accepted in 5ESS.

[2097152] RESTART INDICATION = Upon
receipt of a Restart message,
acEV_PSTN_RESTART_CONFIRM is
generated.

[4194304] FORCED RESTART = On data link
(re)initialization, send RESTART if there is no
call.

[67108864] NS ACCEPT ANY CAUSE = Accept
any Q.850 Cause IE from ISDN.
Note: This option is applicable only to Euro ISDN.

[134217728] NS_BRI_DL_ALWAYS_UP
(0x08000000) = By default, the BRI D-channel
goes down if there are no active calls. If this
option is configured, the BRI D-channel is always
up and synchronized.

[536870912] Alcatel coding for redirect number
and display name is accepted by the device.
Note: This option is applicable only to QSIG (and
relevant for specific Alcatel PBXs such as OXE).

[1073741824] QSI ENCODE INTEGER = If this
bit is set, INTEGER ASN.1 type is used in
operator coding (compliant to new ECMA
standards); otherwise, OBJECT IDENTIFIER
ASN.1 type is used.
Note: This option is applicable only to QSIG.

[2147483648] 5ESS National Mode For Bch
Maintenance = Use the National mode of AT&T
5ESS for B-channel maintenance.
Notes:

To configure the device to support several
ISDNIBehavior features, enter a summation of
the individual feature values. For example, to
support both [512] and [2048] features, set the
895 Mediant 800B Gateway and E-SBC