Related Documentation - AudioCodes Mediant 800B User Manual

Related Documentation

SIP CPE Release Notes
Mediant 800 Gateway and E-SBC Hardware Installation Manual
Complementary Guides
CLI Reference Guide
CPE Configuration Guide for IP Voice Mail
SNMP Reference Guide
SBC Design Guide
Recommended Security Guidelines Configuration Note
SIP Message Manipulations Quick Reference Guide
SAS Application Configuration Guide
CAS Protocol Table Configuration Note
IP-to-IP Application Configuration Guide
Utility Guides
INI Viewer & Editor Utility User's Guide
DConvert User's Guide
AcBootP Utility User's Guide
CLI Wizard User's Guide
Notes and Warnings
Note: This device is considered an INDOOR unit and therefore, must be installed only
indoors. In addition, FXS and Ethernet port interface cabling must be routed only
indoors and must not exit the building.
Note: The scope of this document does not fully cover security aspects for deploying
the device in your environment. Security measures should be done in accordance
with your organization's security policies. For basic security guidelines, refer to
AudioCodes Recommended Security Guidelines document.
Note: Throughout this manual, unless otherwise specified, the term device refers to
your AudioCodes product.
Note: Before configuring the device, ensure that it is installed correctly as instructed
in the Hardware Installation Manual.
User's Manual
Mediant 800B Gateway and E-SBC
Manual Name
20 Document #: LTRT-10286