AudioCodes Mediant 800B User Manual page 257

User's Manual
3. Click Add; the following dialog box appears:
4. Configure the Remote Media Subnet according to the parameters described in the
table below.
5. Click Submit, and then save ("burn") your settings to flash memory.
Table 17-2: Remote Media Subnet Table Parameter Descriptions
Parameter
Index
[RemoteMediaSubnet_RemoteMediaSubnetIndex]
Sub-Realm Name
CLI: name
[RemoteMediaSubnet_RemoteMediaSubnetName]
Prefix Length
CLI: prefix-length
[RemoteMediaSubnet_PrefixLength]
Address Family
CLI: address-family
[RemoteMediaSubnet_AddressFamily]
Destination IP
CLI: dst-ip-address
[RemoteMediaSubnet_DstIPAddress]
QOE Profile Name
CLI: qoe-profile
[RemoteMediaSubnet_QOEProfileName]
BW Profile Name
CLI: bw-profile
[RemoteMediaSubnet_BWProfileName]
Version 6.8
Figure 17-3: Remote Media Subnet - Add Record
Defines an index number for the new table
record.
Defines an arbitrary name to easily identify
the Remote Media Subnet.
The valid value is a string of up to 20
characters.
Defines the subnet mask in Classless Inter-
Domain Routing (CIDR) notation. For
example, 16 denotes 255.255.0.0.
The default is 16.
Defines the IP address protocol.

[2] IPv4 Manual (default)

[10] IPv6 Manual
Defines the IP address of the destination.
The default is 0.0.0.0.
Assigns a Quality of Experience Profile to the
Remote Media Subnet.
Assigns a Bandwidth Profile to the Remote
Media Subnet.
257 Mediant 800B Gateway and E-SBC
17. Control Network
Description