AudioCodes Mediant 800B User Manual page 620

The following procedure describes how to load files using the Web interface's Software
Upgrade Wizard. Alternatively, you can load files using the CLI:

cmp file:
copy firmware from <URL>

ini or auxiliary file:
copy <ini file or auxiliary file> from <URL>

HA devices:
•
Hitless Software Upgrade:
# copy firmware from <URL and file name>
•
Non-Hitless Software Upgrade:
# copy firmware from <URL and file name> non-hitless

To load files using the Software Upgrade Wizard:
1. Make sure that you have installed a new Software License Key (see Software License
Key on page 616) that is compatible with the software version to be installed.
2. It is recommended to enable the Graceful Lock feature (see Locking and Unlocking
the Device on page 583). The wizard resets the device at the end of the upgrade
process, thereby causing current calls to be untimely terminated. To minimize this
traffic disruption, the Graceful Lock feature prevents the establishment of new calls.
3. It is recommended to save a copy of the device's configuration to your computer. If an
upgrade failure occurs, you can restore your configuration settings by uploading the
backup file to the device. For saving and restoring configuration, see Backing Up and
Loading Configuration File on page 624).
4. Open the Software Upgrade wizard, by performing one of the following:
•
Select the Maintenance tab, click the Software Update menu, and then click
Software Upgrade Wizard.
•
On the toolbar, click Device Actions, and then choose Software Upgrade
Wizard.
5. Click Start Software Upgrade; the wizard starts, prompting you to load a .cmp file:
User's Manual
Figure 40-5: Start Software Upgrade Wizard Screen
Mediant 800B Gateway and E-SBC
620 Document #: LTRT-10286