Rejecting Anonymous Calls - AudioCodes Mediant 800B User Manual

Analog & digital voip media gateway
Hide thumbs Also See for Mediant 800B:
Table of Contents

Advertisement

To enable call waiting per port:
1.
Open the Call Waiting page (Configuration tab > VoIP menu > GW and IP to IP >
Analog Gateway > Call Waiting).
2.
Click Add; the following dialog box appears:
3.
Configure call waiting per port according to the parameters described in the table
below.
4.
Click Submit, and then save ("burn") your settings to flash memory.
Table 27-6: Call Waiting Table Parameter Descriptions
Parameter
Index
[CallWaitingPerPort_Index]
Module
[CallWaitingPerPort_Module]
Port
[CallWaitingPerPort_Port]
Port Type
[CallWaitingPerPort_PortType]
Call Waiting Configuration
CLI: enable-call-waiting
[CallWaitingPerPort_IsEnabled]

27.10 Rejecting Anonymous Calls

You can configure the device to reject anonymous calls received from the IP and destined
for
a specific FXS port. This can be configured using the ini file parameter,
RejectAnonymousCallPerPort. If configured, when an FXS interface receives an
anonymous call, the device rejects the call and responds with a SIP 433 (Anonymity
Disallowed) response. For a description of the parameter see ''Caller ID Parameters'' on
page 853.
User's Manual
Figure 27-7: Call Waiting Table - Edit Record
Defines an index number for the new table record.
Note: Each table row must be configured with a unique index.
(Read-only) Displays the module number on which the port is
located.
(Read-only) Displays the port number.
(Read-only) Displays the port type (e.g., FXS).
Enables call waiting for the port.
[0] Disable
[1] Enable = Enables call waiting for the port. When the device
receives a call on a busy port, it responds with a SIP 182
response (not with a 486 busy). The device plays a call waiting
indication signal. When the device detects a hook-flash from
the FXS port, the device switches to the waiting call. The
device that initiated the waiting call plays a call waiting
ringback tone to the calling party after a 182 response is
received.
468
Mediant 800B Gateway and E-SBC
Description
Document #: LTRT-10286

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents