AudioCodes Mediant 800B User Manual page 127

User's Manual
Application
The following procedure describes how to configure DiffServ-to-VLAN priority mapping in
the Web interface. You can also configure this using the table ini file parameter,
DiffServToVlanPriority or CLI command configure voip > qos vlan-mapping.

To configure QoS:
1. Open the Diff Serv Table page (Configuration tab > VoIP menu > Network > QoS
Settings).
2. Configure DiffServ-to-VLAN priority mapping (Layer-2 QoS):
a. Click Add; the following dialog box appears:
b. Configure a DiffServ-to-VLAN priority mapping (Layer-2 QoS) according to the
parameters described in the table below.
c. Click Submit, and then save ("burn") your settings to flash memory.
Parameter
Index
Differentiated Services
CLI: diff-serv
[DiffServToVlanPriority_DiffServ]
VLAN Priority
CLI: vlan-priority
[DiffServToVlanPriority_VlanPriority]
3. Under the Differentiated Services group, configure DiffServ (Layer-3 QoS) values per
CoS.
Figure 12-8: QoS Settings Page - Differentiated Services
Version 6.8
Traffic / Network Types

Control
Figure 12-7: DiffServ Table Page - Add Record
Table 12-14: DiffServ Table Parameter Descriptions
Defines an index number for the new table record.
Note: Each table row must be configured with a unique index.
Defines a DiffServ value.
The valid value is 0 to 63.
Defines the VLAN priority level.
The valid value is 0 to 7.
Class-of-Service (Priority)
Description
127 Mediant 800B Gateway and E-SBC
12. Network