Call Setup Rules Parameters - AudioCodes Mediant 800B User Manual

Parameter
Web: Cost Group > Time
Band Table
EMS: Time Band
Provisioning > Time Band
CLI: configure voip >
services least-cost-routing
cost-group-time-bands
[CostGroupTimebands]

56.14.4 Call Setup Rules Parameters

The Call Setup Rules parameters are described in the table below.
Parameter
Web: Call Setup Rules
CLI: configure voip/services
call-setup-rules
[CallSetupRules]
User's Manual
For example: CostGroupTable 2 = "Local Calls", 2, 1;
Note: For a detailed description of this table, see ''Configuring Cost
Groups'' on page 231.
This table parameter configures time bands and associates them with
Cost Groups.
[CostGroupTimebands]
FORMAT CostGroupTimebands_TimebandIndex =
CostGroupTimebands_StartTime, CostGroupTimebands_EndTime,
CostGroupTimebands_ConnectionCost,
CostGroupTimebands_MinuteCost;
[\CostGroupTimebands]
Note: For a detailed description of this table, see ''Configuring Time
Bands for Cost Groups'' on page 232.
Table 56-76: Call Setup Rules Parameters
This table parameter defines Call Setup Rules that the device runs at
call setup for LDAP-based routing and other advanced routing logic
requirements including manipulation.
[ CallSetupRules ]
FORMAT CallSetupRules_Index = CallSetupRules_RulesSetID,
CallSetupRules_AttributesToQuery, CallSetupRules_AttributesToGet,
CallSetupRules_RowRole, CallSetupRules_Condition,
CallSetupRules_ActionSubject, CallSetupRules_ActionType,
CallSetupRules_ActionValue;
[ \CallSetupRules ]
Note: For a detailed description of this table, see ''Configuring Call
Setup Rules'' on page 234.
990
Mediant 800B Gateway and E-SBC
Description
Description
Document #: LTRT-10286