Ip Media Parameters - AudioCodes Mediant 800B User Manual

User's Manual
Parameter
Web: SAS IP-to-IP Routing Table
[IP2IPRouting]

56.13 IP Media Parameters

The IP media parameters are described in the table below.
Parameter
Web: Number of Media Channels
EMS: Media Channels
CLI: media-channels
[MediaChannels]
Web: NetAnn Announcement ID
[NetAnnAnncID]
Version 6.8
part):
SASRegistrationManipulation 0 = 0, 4;
This table parameter configures the IP-to-IP Routing table for
SAS routing rules. The format of the ini file table parameter is as
follows:
[IP2IPRouting]
FORMAT IP2IPRouting_Index = IP2IPRouting_SrcIPGroupID,
IP2IPRouting_SrcUsernamePrefix, IP2IPRouting_SrcHost,
IP2IPRouting_DestUsernamePrefix, IP2IPRouting_DestHost,
IP2IPRouting_DestType, IP2IPRouting_DestIPGroupID,
IP2IPRouting_DestSRDID, IP2IPRouting_DestAddress,
IP2IPRouting_DestPort, IP2IPRouting_DestTransportType,
IP2IPRouting_AltRouteOptions;
[\IP2IPRouting]
For example:
IP2IPRouting 1 = -1, *, *, *, *, 0, -1, -1, , 0, -1, 0;
Table 56-73: IP Media Parameters
Defines the maximum number of DSP channels allocated for
various functionalities such as transcoding, IP conferencing,
The default is 0.
Notes:

For this parameter to take effect, a device reset is
required.

The SBC application does not require DSP channels.
The SBC application uses DSP channels only if media
transcoding is needed, where two DSP channels are
used per transcoding session.

Other DSP channels can be used for PSTN interfaces.
Defines the NetAnn identification string (up to 16 characters)
for playing an announcement using the NetAnn interface.
The application server sends a regular SIP INVITE message
with a SIP URI that includes this identifier string and a
"play=" parameter that identifies the necessary
announcement. The default is 'annc'.
Example 1: INVITE sip:
annc@10.2.3.4;play=http://localhost/1.
Example 2: INVITE sip:
annc@10.2.3.4;play=http://10.2.3.4/Annc/ello.wav.
979
56. Configuration Parameters Reference
Description
Description
Mediant 800B Gateway and E-SBC