AudioCodes Mediant 800B User Manual page 291

User's Manual

To configure SIP message manipulation rules:
1. Open the Message Manipulations page (Configuration tab > VoIP menu > SIP
Definitions > Msg Policy & Manipulation > Message Manipulations).
2. Click Add; the following dialog box appears:
Figure 18-2: Message Manipulations Table - Add Record Dialog Box
3. Configure a Message Manipulation rule according to the parameters described in the
table below.
4. Click Submit, and then save ("burn") your settings to flash memory.
An example of configured message manipulation rules are shown in the figure below:

Index 0: Adds the suffix ".com" to the host part of the To header.

Index 1: Changes the user part of the From header to the user part of the P-Asserted-
ID.

Index 2: Changes the user part of the SIP From header to "200".

Index 3: If the user part of the From header equals "unknown", then it is changed
according to the srcIPGroup call's parameter.

Index 4: Removes the Priority header from an incoming INVITE message.
Table 18-2: Message Manipulations Parameter Descriptions
Parameter
Index
[MessageManipulations_Ind
ex]
Manipulation Name
CLI: manipulation-name
[MessageManipulations_Ma
Version 6.8
Figure 18-3: Message Manipulations Page
Defines an index number for the new table record.
Note: Each rule must be configured with a unique index.
Defines an arbitrary name to easily identify the Message
Manipulation rule.
The valid value is a string of up to 16 characters.
291
18. SIP Definitions
Description
Mediant 800B Gateway and E-SBC