AudioCodes Mediant 800B User Manual page 952

Parameter
[SetIp2TelRedirectReason]
Web: Set TEL-to-IP Redirect
Reason
CLI: tel2ip-redir-reason
[SetTel2IpRedirectReason]
Web: Send Screening
Indicator to IP
EMS: Screening Indicator To
IP
[ScreeningInd2IP]
Web: Send Screening
Indicator to ISDN
EMS: Screening Indicator To
ISDN
[ScreeningInd2ISDN]
User's Manual

[-1] Not Configured (default)

[0] Unkown

[1] Busy

[2] No Reply

[3] Network Busy

[4] Deflection

[9] DTE out of Order

[10] Forwarding DTE

[13] Transfer

[14] PickUp

[15] Systematic/Unconditional
Note: This parameter is applicable only to digital PSTN interfaces
(ISDN).
Defines the redirect reason for Tel-to-IP calls. If redirect (diversion)
information is received from the Tel, the redirect reason is set to the
value of this parameter before the device sends it on to the IP.

[-1] Not Configured (default)

[0] Unkown

[1] Busy

[2] No Reply

[3] Network Busy

[4] Deflection

[9] DTE out of Order

[10] Forwarding DTE

[13] Transfer

[14] PickUp

[15] Systematic/Unconditional
Note: This parameter is applicable only to digital PSTN interfaces
(ISDN).
Overrides the calling party's number (CPN) screening indication in
the received ISDN SETUP message for Tel-to-IP calls.

[-1] Not Configured = (Default) Not configured (interworking from
ISDN to IP) or set to 0 for CAS.

[0] User Provided = CPN set by user, but not screened (verified).

[1] User Passed = CPN set by user, verified and passed.

[2] User Failed = CPN set by user, and verification failed.

[3] Network Provided = CPN set by network.
Note: This parameter is applicable only if the Remote Party ID
(RPID) header is enabled.
Overrides the screening indicator of the calling party's number for IP-
to-Tel ISDN calls.

[-1] Not Configured = (Default) Not configured (interworking from
IP to ISDN).

[0] User Provided = user provided, not screened.

[1] User Passed = user provided, verified and passed.

[2] User Failed = user provided, verified and failed.

[3] Network Provided = network provided
Note: This parameter is applicable only to digital PSTN interfaces
(ISDN).
952
Mediant 800B Gateway and E-SBC
Description
Document #: LTRT-10286