CHAPTER 11 TROUBLESHOOTING
5
Stringing the Guide Wire
The guide wire is 0.148 mm in diameter.
When stringing it, be sure to follow the order indicated in the figure.
A
6
Adjusting the Height of the Charging Wire
The height of the charging wire may be adjusted by turning the screw located behind
the charging assembly. A full single turn of the screw raises or lowers the charging wire
by about 0.7 mm.
Corona Unit
Primary
Transter
11-32
COPYRIGHT © 1997 CANON INC.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
3
2
5
1
4
7
Figure 11-232
Height of Standard Position
A
B
Figure 11-233
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
6
9
8
10
11
13
A=10.6 ± 0.3mm
B=9.5 ± 0.2 mm
12
B