Sharp IV-S20 User Manual page 62

Continued from the preceding page
(6) Operation for point setting
1. Press the ESC key, and all of the menus to be used for point setting will be displayed.
1POINT SIZE
2STO PNT POSITIONS 000(0~255) REG.NO YES
2
3START POINT POS
3
4BLOCK LAYOUT
5BLOCK SPACING
6STORE BLOCK COND
7DELETE BLOCK COND EXEC
8UPPER MENU
6
2. Move the cursor to 2 STO PNT POSITIONS (point registration, individual) with the up and
down keys, and press the SET key. Move the cursor to YES with the left and right keys, and
press the SET key.
- The window (8 pixels x 8 pixels) for point No. 000 will start blinking.
3. Move the cursor to 3 START POINT POS (point position, starting) with the up and down
keys, and press the SET key.
4. Move the window for point No. P000 to the desired position in the object and press the SET
key.
- The binary image will be displayed in the window according to the conditions set in item (5).
5. Move the cursor to 2 STO PNT POSITIONS (point registration, individual) with the up and
down keys, and press the SET key. Enter the number "001" with the up key. Move the cursor
to "YES" with the right key, and press the SET key.
- Move the window for point No. P001 the same as in steps 3 and 4, and press the SET key.
- Create windows for point Nos. P002 to P006 the same way.
6. Move the cursor to 8 UPPER MENU with the up and down keys, and press the SET key.
- The screen will return to [MEASURING COND] (measurement condition) menu.
7. On the [MEASURING COND] menu, move the cursor to 5 UPPER MENU with the up and
down keys, and press the SET key.
- The screen will return to the [TYPE00-MEAS1] (type: 00, measurement: 1) menu.
8. On the [TYPE00-MEAS1] menu, move the cursor to 7 EVALUATION COND (evaluation
condition) with the up and down keys, and press the SET key.
- The [EVALUATION COND] menu will be displayed.
(7) Operation on the [EVALUATION COND] (evaluation condition) menu
[EVALUATION COND] (TYPE00-MEAS1-POINT MEAS)
1CHG PAGE TEST RUN
2P000 :
1
3P001 :
4P002 :
5P003 :
6P004 :
7P005 :
8P006 :
9P007 :
0MAKE A TEST RUN (SET KEY)
3
qUPPER MENU
4
1. Move the cursor to 2 P000 with the up and down keys, and press the SET key.
2. Select WH (white) with the up and down keys, and press the SET key.
- Specify WH (white) for point No. P001 to P006 the same as in steps 1 and 2.
- In this operation, the images (binary images) in the windows at point No. P000 to P006 are
checked to see if they are white or black. If they are all white, the program can decide that
the object exists.
3. Move the cursor to 0 MAKE A TEST RUN with the up and down keys, and press the SET
key. A test will be executed, and the test result (OK/NG) will be displayed.
Continued on the following page
Y-08 X-08(2~32)
MOVE( , )
001 001
X-004 Y-004
EXEC
[TEST RESULT ]
WH OK
2
WH OK
WH OK
WH OK
WH OK
WH OK
WH OK
3-41
Operation Examples (Point measurement)
(Point No. registration)
P001
2
P004
P006
3
[OUT]
NO
NO
NO
NO
NO
NO
NO
P000 4
P002
5
P003
3
P005