Table of Contents
Advertisement
Distance and angle measurement
Continued from the previous page: GRAY&EDGE, GRAV.
[ANGLE SETTINGS] (TYPE00-MEAS.1-DST&ANGL MEAS)
1ANGLE NO.
2ANGLE TYPE
3POINT NO.1 :
4POINT NO.2 :
5POINT NO.3 :
6UPPER MENU
Items 3 and 4 will be displayed unless NO is selected in item 2.
If 3PT-ANGL (3 point angle) is selected in item 2, then item 5 will be displayed.
Angle settings
1ANGLE NO.
2ANGLE TYPE
3POINT NO.1
4POINT NO.2
5POINT NO.3
6UPPER MENU
Angle: When a 3 point angle is specified
Point 3
Point 1 is the point of intersection of the two lines. Relative to the line between points 1 and 2, the
9
line between points 1 and 3 will be said to be at a positive angle if the angle is measured in a
counterclockwise direction, and it will be at a negative angle if it is measured in a clockwise
direction.
Angle: When a 2-point (horizontal) angle
is specified
Point 1
Relative to the horizontal line, the line from
point 2 that intersects point 1 will be said to
at a positive angle if the angle is measured
in a counterclockwise direction and at a
negative angle if it is measured in a
clockwise direction.
Return to the [MEASURING COND] (measurement conditions) menu and select item 7 UPPER MENU
Continued on the following page
00(0~15)
NO 3PT-ANGL 2PT-ANGL(HORI VERT)
ST-PNT00
AUX.NO
ST-PNT00
AUX.NO
ST-PNT00
AUX.NO
Set the angle number to any number from 0 to 15
Select either a 3-point angle (3 points of data are required) or a 2-point
angle (horizontal and vertical).
Enter the starting point number for the angle type to be measured, as
specified in item 2.
This will return you to the [MEASURING COND] menu.
+Angle ( +180.0¡)
Point 2
Point 1
Point 1
Point 2
+angle
Horizontal line
If auxiliary point settings have been
made in the [AUX.CONDITIONS]
(auxiliary condition) menu, then they
may be used for the measurement
Setting details
Point 2
+Angle (-180.0¡ )
Point 3
Angle: When a 2-point (vertical) angle is
specified
Point 2
+angle
Relative to the vertical line, the line from point 2
that intersects point 1 will be said to at a
positive angle if the angle is measured in a
counterclockwise direction and at a negative
angle if it is measured in a clockwise direction.
9-66
Vertical line
Point 1
Advertisement
Table of Contents
