Table of Contents
Advertisement
Run Menu Conditions and Settings
[5] Binary image display
Select "YES" or "NO" to display a binary image on the MAIN OPS MENU.
On the [MAIN OPS MENU,] move the cursor to SET-SCRN, and press the SET key.
- On the [SYSTEM SETUP] menu, move the cursor to item 1 OPS MENU
SETTING and press the SET key.
8
[Operation procedure]
1. On the [RUN MENU SETTINGS] menu, move the cursor to item 6 SHOW BINARY IMAGE with the
up and down keys, and press the SET key.
2. Move the cursor to YES or NO with the left and right keys, and press the SET key.
[Display examples]
· When the display mode has been set
to YES
(TYPE00)
OK
MEAS. XXXXXXms
MEAS1 CAM1 CNT-BIN-OBJ
REGST NO. 00(0 3)
NUMBER
TOTAL ARA 004434 OK
X0 6
:
MSR-CHNG REG-CHNG PC-M0NTR SET-SCRN MANL-TYP-CHG
[RUN MENU SETTINGS]
1MONITOR OUTPUT CAM1 CAM2 CAM1&2
2CAMERA1&2
CAM1=MD CAM2=MD
3CAPTURE AN IMAGE PARTIAL-IMAGE WHOLE-IMAGE NO
4MESSAGE DISPLAY YES(RESULT.OK) YES(RESULT.NO) NO
5PATTERN DISPLAY MEAS-RESULT- OUT NO
6SHOW BINARY IMAGE YES NO
7
YES NO
8DISPLAY + CURSOR NO YES
9OBJ.NO.MANL MODE NO YES
0IMAGE DISPLAY
FREEZE THROUGH
qUPPER MENU
6 SHOW BINARY
IMAGE
A binary image will be displayed on the MAIN OPS MENU.
Note: When the monitor camera mode has been set to the 2-
YES
A binary image will not be displayed on the MAIN OPS MENU.
NO
F L C1ALLC2NO
00006 OK
Y0 7
BUSY
:
:
MANL-MESR
Description
screen divided display mode (cameras 1 and 2), the
binary image will not be displayed even if "YES" is
selected.
· When the display mode has been set
to NO
(TYPE00)
VX.X
OK
MEAS. XXXXXXms
MEAS1 CAM1 CNT-BIN-OBJ
REGST NO. 00(0 3)
NUMBER
00006 OK
TOTAL ARA 004434 OK
X0 6
:
MSR-CHNG REG-CHNG PC-M0NTR SET-SCRN MANL-TYP-CHG
8-6
F L C1ALLC2NO
VX.X
Y0 7
BUSY
:
:
Advertisement
Table of Contents
