Sharp IV-S20 User Manual page 308

Communication
(5) Measurement execution functions 5, 6, 7 and 8: codes 18
The measurement execution functions 5 to 8 can be processed when the measurement is started
by a CCD trigger (camera 1) and is controlled by start sampled instructions. The contents of the
commands and responses are the same as those for the measurement run functions 1 to 4, except
for the processing code.
1. Measurement execution function 5 (evaluation result): code 18
The measurement for a specified object type is executed, and the data obtained is compared with
the criteria, and the evaluation result (OK/NG) is output.
Ë
Ë
- The contents of the command and response are the same as those for the measurement
execution function 1 (code 10
2. Measurement execution function 6 (evaluation result + measurement data, fixed): code 19
The measurement for a specified object type is executed, and the evaluation result (OK/NG) and
measurement data obtained from each measurement function are output.
Ë Command
Ë
- The contents of the command and response are the same as those for the measurement
execution function 2 (code 11
3. Measurement execution function 7 (evaluation result + measurement numerical data): code 1A
13
The measurement for a specified object type is executed, and the evaluation result (OK/NG) of
each measurement function and the data from a specified measurement block are output.
Ë Command
Ë Response
- The contents of the command and response are the same as those for the measurement
execution function 3 (code 12
Command
Object
type
: 1 8
SC SC CR
(H) (L)
Response
Output evaluation
Object
type
: 1 8
Y0
RC RC
(H) (L)
(H)
Object
type
SC SC CR
: 1 9
(H) (L)
Response
Output evaluation
Object
SC SC
type
: 1 9
(H) (L) Y0 Y1
(H)
Object
Block
type
: 1 A
Output evaluation
Object
type
RC RC
: 1 A
Y0
(H) (L)
(H)
result
...
Y1 Y15
SC SC CR
(H) (L)
).
1
Measure-\
ment 0
result
...
Y15
Data on Data on
measure- measure-
ment 1 2 ment 2 2
).
SC SC CR
(H) (L)
Specified
result
block data
Y1 Y15
).
13-8
, 19 , 1A and 1B
(H) (H) (H) (H)
(H)
Measurement 0
Camera 1 Camera 2
data 2 data 2
Data on
SC SC CR
measure-
ment 3 2 (H) (L)
SC SC CR
(H) (L)
(H)
(H)