Table of Contents
Advertisement
(2) Setting details
On the MAIN OPS MENU, move the curson to SET-SCRN item, and press the SET key.
- On the [SYSTEM SETUP] menu, move the cursor to 2 OBJECT TYPE CND (conditions of
object type) and press the SET key.
[OBJECT TYPE. COND.]
1OBJECT TYPE NO.
2EDIT
3TITLE REGISTRATION (TO NEXT SUB-MENU)
4MEAS.0, CAMERA1
5POS. ADJ.CAMERA1
6MEAS.0, CAMERA2
7POS. ADJ.CAMERA2
8SELECT CAMERA IMG NO CAM1 CAM1 CAM1&2
0MEASUREMENT 1
qMEASUREMENT 2
wMEASUREMENT 3
eFINAL CALC RESULT
rFINAL OUTPUT COND (TO NEXT SUB-MENU)
tSYSTEM-IN/OUT
yHALT MEAS ON NG
uUPPER MENU
8
At item
SELECT CAMERA IMG (camera selection), select the NO, CAM1, CAM2, or
CAM1&2 with left and right keys and press the SET key. When you have specified the
camera, item
· The display seen when
8SELECT CAMERA IMG NO CAM1 CAM1 CAM1&2
9COMPARE IMAGES
8
When
The list of the settings which may be selected at item 9 COMPARE IMAGES, (comparative
calculations between images) is as follows.
8
9 COMPARE IMAGES
SELECT
(calculation between
CAMERA
images)
IMG
NO (none)
CAM 1
None
(camera 1)
Subtraction I1-T1
The absolute value of the
difference between |I1-T1|
None
CAM 2
(camera 2)
Subtraction I2-T2
The absolute value of the
difference between |I2-T2|
Subtraction I1-I2
CAM 1&2
(cameras
Subtraction I2-I1
1 & 2)
The absolute value of the
difference between |I2-I2|
* 1 The reference images T1 and T2 may be set in item 7 STZORE REF IMAGE (reference
images for comparison between images), which can be found on the [OBJECT TYPE I/O]
menu. (see the next page)
* 2 The size of the areas covered by I1 and I2 (the images taken by cameras 1 and 2) may be
set in item 7 SET IMAGE WINDOWS (setting areas for comparison between images)
which can be found in the [OBJECT TYPE I/O] menu. (see the next page)
Continued on the following page
00(0~15)
COPY(
NO (TO NEXT SUB-MENU)
NO ADJ. [REG. 0-1PNTSXY]
NO (TO NEXT SUB-MENU)
NO ADJ. [REG. 0-1PNTSXY]
NO (TO NEXT SUB-MENU)
NO (TO NEXT SUB-MENU)
NO (TO NEXT SUB-MENU)
(TO NEXT SUB-MENU)
(TO NEXT SUB-MENU)
NO YES
9
COMPARE IMAGES, will be displayed.
8
is set to CAM1
NO SUB.I1 T1 DIFF.ABS I1 T1
9
is set, otherwise
will be displayed as shown below in column
Comparative calculations of differences between images will not be carried out.
Comparative calculations of differences between images will not be carried out.
The reference image T1 (* 1) is subtracted from the image taken by camera 1.
The absolute value of the difference is calculated between the reference image
T1 (* 1) and the image taken by camera 1.
Comparative calculations of differences between images will not be carried out.
The reference image T2 (* 1) is subtracted from the image taken by camera 2.
The absolute value of the difference is calculated between the reference image
T2 (* 1) and the image taken by camera 2.
The image taken by camera 1 is subtracted from the image taken by camera 2.
The image taken by camera 2 is subtracted from the image taken by camera 1.
The absolute value of the difference is calculated between the image taken by
camera 1 and the image taken by camera 2.
9-25
TYPE00) INITIALIZE
Contents
Shared settings
9
9
Advertisement
Table of Contents
