Table of Contents
Advertisement
Degree of match inspection
Continued from the previous page.
Select item 5 EVALUATE CRITERIA (criteria conditions)
This is how the display looks when the
GRAY-IMG-PROC (gray scale processing)
mode is selected.
1MEAS WINDOW(MDL0)
2REF IMAGE(MODEL0)
3SEARCH AREA(MDL0) MOVE UP.L(216,200) LO.R(295,279)
4DTECT COORD(MDL0)
5CONTR. PIXEL(MDL0)
6MEAS WINDOW(MDL1)
7REF IMAGE(MODEL1) MOVE UP.L(224,208) LO.R(287,271) REG. DISP
8SEARCH AREA(MDL1)
9DTECT COORD(MDL1)
0CONTR. PIXEL(MDL1)
qDETECT ACCURANCY
wUPPER MENU
· You can switch between displaying all of the headings together and displaying each one
separately, using the ESC key.
1MEAS WINDOW(MDL0)
(measurement window)
9
2REF IMAGE(MODEL0)
(reference images)
3SEARCH AREA(MDL0)
(search area )
4DTECT COORD(MDL0)
(detection coordinates)
5CONTR. PIXEL(MDL0)
(pixel contraction)
6MEAS WINDOW(MDL1)
(measurement window)
7REF IMAGE(MODEL1)
(reference image)
8SEARCH AREA(MDL1)
(search area)
9DTECT COORD(MDL1)
(detection coordinates)
0CONTR. PIXEL(MDL1)
(pixel contraction)
qDETECT ACCURANCY
(accuracy of detection)
wUPPER MENU
Continued on the following page
RECTANGLE X-LINE Y-LINE
MOVE UP.L(224,208) LO.R(287,271) REG. DISP
CNTR FREE(256,240)
1 2 3
RECTANGLE X-LINE Y-LINE
MOVE UP.L(224,512)LO.R(287,512)
CNTR FREE(256,240)
1 2 3
STANDARD HI-PRC
Menu
Select the measurement window shape for model 0 (positioning).
Record a reference image for model 0
· The upper left or lower right area of the screen specified above will
change according the setting in item 1.
RECTANGLE(rectangle)
X-LINE (horizontal line)
Y-LINE (vertical line)
If model 0 is set to SEARCH (search), then enter the search area.
Set the position of the cursor inside the measurement window for
model 0.
· If FREE is selected, then the position of cursor is optional.
If model 0 is set to SEARCH (search yes), then enter the pixel
contraction level.
-See (page 9·6) gray scale processing, in shared settings.
· When either X-LINE (horizontal line) or Y-LINE(vertical line) are
selected in item 1, you can select only 1 or 2 in item 5.
The settings for these are the same for model 1 as they are for model
0, numbers 1 to 5.
Set the level of detection precision for models 0 and 1.
-See page 9·6 "Gray scale processing" in shared settings.
This will return you to the [MEASURING COND] (measurement
conditions) menu.
To see how the display looks when the BINRY-
IMG-PROC (binary processing) mode is selected.
Go to page 9·51.
Setting details
The selection
The display in the upper left,
at item 1
lower right areas of the screen.
Upper left, lower right.
Starting point, end point
9·48
These entries are displayed
when SEARCH (search yes)
is selected for model 0.
These entries are displayed
when YES (NO-SEARCH)
(yes-search no) or YES
(SEARCH) (yes-search yes)
is selected for model 1.
This is displayed when YES
(SEARCH) (yes-search yes)
is selected for model 1.
Advertisement
Table of Contents
