Table of Contents
Advertisement
Installation Conditions and Method
Note
- When the camera cable and extension camera cable (IV-S20EC2/4), leading to the camera
body (IV-S20C1), is bent, its bending radius should be longer than 40 mm.
If the camera cable will be bent repeatedly during operation, design the cable layout so that
6
the bending radius is 75 mm or more and use components that can be flexed up to 2 million
times.
External dimensions of extension camera cable (IV-S20EC2/4)
49.1
Bending radius: Min. 40 mm
(Unit: mm)
4000 (IV-S20EC4)
2000 (IV-S20EC2)
52.2
Camera cable
6-22
Advertisement
Table of Contents
