Table of Contents
Advertisement
3-5 Lead inspection
An example of the operations used to inspect IC lead pitches is given below.
Lead
IC
(1) Operation on the MAIN OPS MENU (after initialize all conditions)
MAIN OPS MENU
(TYPE00)
MESR.
MESR0 CAM1 NO
X0~6
:
MSR-CHNG REG-CHNG PC-MONTR SET-SCRN MANL-TYP-CHG
1. Move the cursor to [SET-SCRN] with the right and left keys, and press the SET key.
- The [SYSTEM SETUP] menu will be displayed.
(2) Operation on the [SYSTEM SETUP] menu
[SYSTEM SETUP]
1OPS MENU SETTING (TO NEXT SUB-MENU)
2OBJECT TYPE COND (TO NEXT SUB-MENU)
3I/O CONDITIONS
1
4ADJ. CAM POSITION (TO NEXT SUB-MENU)
5DISPLAY MODE
6RECEIVING PARMS
7INIT ALL PARMS
8SELF DIAGNOSTICS EXEC
9SAVE IN FLASH MEM EXEC
0OPERATIONS
1. Move the cursor to 2 OBJECT TYPE COND (conditions of object type) with the up and down
keys, and press the SET key.
- The [OBJECT TYPE COND] menu will be displayed.
Continued on the following page
Lead pitch
Lead length
Line to be inspected
ms
Y0 7
BUSY
:
1
(TO NEXT SUB-MENU)
JAPANESE ENGLISH
EXEC
EXEC
3-31
Operation Examples (Lead inspection)
F L C1ALLC2NO
VX.X
:
F C1 H
3
Advertisement
Table of Contents
