Table of Contents
Advertisement
Chapter 12: Other Settings and Operations
12-1 Settings
[1] Change the Japanese or English display mode
The language used on the screen scan be set to Japanese or English.
[Operating procedure]
On the [MAIN OPS MENU], move the cursor to SET-SCRN, and press the SET key.
1
2
3
4
5
1
6
7
8
9
0
1. Move the cursor to item 5 DISPLAY MODE (display mode) with the up and down keys, and press
the SET key.
2. Move the cursor to JAPANESE or ENGLISH with the left and right keys.
3. When you change to another menu, it will be displayed in the selected language.
[Display example]
[SYSTEM SETUP]
1OPS MENU SETTING (TO NEXT SUB-MENU)
2OBJECT TYPE COND (TO NEXT SUB-MENU)
3I/O CONDITIONS
4ADJ. CAM POSITION (TO NEXT SUB-MENU)
5DISPLAY MODE
6RECEIVING PARMS
7INIT ALL PARMS
8SELF DIAGNOSTICS EXEC
9SAVE IN FLASH MEM EXEC
0OPERATIONS
[SYSTEM SETUP] menu shown above in the English mode.
(TO NEXT SUB-MENU)
JAPANESE ENGLISH
EXEC
EXEC
12-1
Other Settings and Operations
([SYSTEM SET UP] menu)
2
12
Advertisement
Table of Contents
