Table of Contents
Advertisement
Distance and angle measurement
Continued from the previous page: GRAY&EDGE, GRAV.
[NUMERIC CALC] (TYPE00-MEAS.1-DST&ANGL MEAS)
1CALC.RESULT N00(0~15)
2OBJECT TYPE NO MATCH[M] CORD[X Y] AUX[HX HY]
3FORMULA
4UPPER&LOWER LIMIT +00000000.0~ +00000000.0
5OUTPUT
6RUN A TEST
7UPPER MENU
N00
N01
N02
N03
Numerical calculation
1CALC.RESULT
(calculation result)
2OBJECT TYPE (type)
9
3FORMULA
4UPPER&LOWER LIMIT
(upper and lower limits)
5OUTPUT
6RUN A TEST
(make a test run)
7UPPER MENU
- The number of formulas which can be set are dictated by the selections made in items 2 and 3 as follows.
Degree of match [M]
Coordinates [X][Y]
Auxiliary [HX/HY]
Distance [D]
Angle [B]
Numerical calculation [NC]
Constant [C]
- For more information on numerical calculations see section 9-2 [4] Numerical calculations .
Note: You must run a test using item 6 RUN A TEST before making any calculations.
Return to the [TYPE00-MEAS1 to 3] and select item 9 OUTPUT CONDITIONS (output condition)
Continued on the following page
DIST[D] ANGL[B] NUM-CALC[NC] CNST[C]
REG.00(0~15) N00(0~15)
+ - ∗
/
DEL. END
NO Y0(0~7) C000(0~107)
(SET KEY)
[D]
00D
+00000350.0~ +00000355.0
Set the recording and display the results from arithmetical operation for
specified output data at any value from 00 to 15.
Select the type of data being calculated.
A number of formula settings are used.
The first line will change according to the selection made in item 2.
The degree of match with the reference
image [M] coordinates [XY], auxiliary
[HX, HY], distance [D] and angle [B].
Numerical calculations [NC]
Constant [C]
Note: Please use a smaller number for the number of formulas at N (00 to 15)
than that used for 1 CALC. RESULT N (00 to 15).
Set the upper and lower limits for decisions.
Set the output conditions for the results of calculations.
Pressing the SET key will record the setting details as well as run a test.
Returns you to the [TYPE00-MEAS1 to 3] menu.
2OBJECT TYPE
00M to 15M
00X to 15X/00Y to 15Y
00HX to 15Hx/00HY to 15HY
00D to 15D
00B to 15B
ABS/ /TAN/ATAN (00 to 15)
-99999999.9 to +99999999.9
The numbers ranging from 00 to 15 in front of the characters are registration numbers.
Y0
00000352.0
OK
Setting details
Selection of 2
Number of formulas
9-68
The first line of the display
Record 00 (0 to 15) N00 (0 to 15)
ABS
TAN ATAN N0 (0 to 15) (the
second line will not be displayed)
+00000000.0 (the second line will not
be displayed)
Advertisement
Table of Contents
