Table of Contents
Advertisement
Overview
[6] Counting quantities by binary conversion
Pur-
pose
1
Appli-
cation
Exam-
ple
Detailed
instruc-
tion
[7] Object identification (labeling) by binary conversion
Pur-
pose
Appli-
cation
Exam-
ple
Detailed
instruc-
tion
Checks the number of objects (max. 3000 pcs.) when there is more than one object in an
image. Measurement of the object's position is optional.
- When the specified pixel field has been converted to a binary image, the white areas
are measured or identified as separate objects and counted.
Counting pieces of food or parts
Workpiece
- Inspection procedure
Capture image
- Setting measurement program _See "9-8 Counting quantities by binary conversion"
When there are several objects and the measuring position is arbitrary, the presence or
absence of objects and the size of the objects can be determined.
- The specified pixel area is converted to a binary image. The number of objects, total
size of the white area (the objects) and the area, center of gravity, main axis angle, fillet
diameter, and circumference of each white area can be measured.
Counting the number of food products or parts, measuring the sloped angle or center of
gravity of parts, and measuring the size of food products.
[Measurement of 6 objects]
No.1
Objects
No.4
- Inspection procedure
Image capture
Convert to binary values
Measurement (area, gravity center, spindle axis angle,
fillet diameter, and circumference )
- Setting measurement program _ See "9-9 Object identification by binary conversion"
Convert to binary values
No.2
No.3
No.5
No.6
1-6
[Measured result]
Æ Number of workpieces/total area siz
Measure (quantity, total area size)
[Measured result]
Æ Object identification (labeling and
numbering), number of objects
present, total area
Æ Area, center of gravity, main axis
angle, fillet diameter, and circumf-
erence of each object (No.1 to
No.6).
Label (with serial numbers)
Advertisement
Table of Contents
