Table of Contents
Advertisement
Run Menu Conditions and Settings
[9] Image display
Select the desired measurement image status (FREEZE or THROUGH) on the MAIN OPS MENU.
[Operation procedure]
1. On the [RUN MENU SETTINGS] menu, move the cursor to item 0IMAGE DISPLAY with the up
and down keys, and press the SET key.
2. Move the cursor to FREEZE or THROUGH with the left and right keys, and press the SET key.
[10] Main operations menu lock
To prevent accidental changes to conditions you have set, the MAIN OPS MENU can be locked so that
8
the screen cannot be changed to SET-SCRN. The operation is carried out on the [POWER ON
SETTINGS] menu.
[Display procedure]
Follow the procedure described below when turning ON the power to the IV-S20 main housing, and
the [POWER ON SETTINGS] menu will be displayed on the monitor.
1. Turn ON the power to the IV-S20 main housing, while holding down the ESC key.
2. Keep pressing the ESC key down for approx. 3 sec., after turning ON the power and the menu will
be displayed.
[Operation procedure]
1. On the [POWER ON SETTINGS] menu, move the cursor to item 1 MAIN OPS MENU with the up
and down keys, and press the SET key.
2. Move the cursor to UNLOCK or LOCK with the left and right keys, and press the SET key.
3. Move the cursor to item 2 OPERATION with the up and down keys, and press the SET key.
Press the SET key once more.
- The screan returns to the MAIN OPS MENU.
[Display when the MAIN OPS MENU is locked]
[RUN MENU SETTINGS]
1MONITOR OUTPUT CAM1 CAM2 CAM1&2
2CAMERA1&2
CAM1=MD CAM2=MD
3CAPTURE AN IMAGE PARTIAL-IMAGE WHOLE-IMAGE NO
4MESSAGE DISPLAY YES(RESULT.OK) YES(RESULT.NO) NO
5PATTERN DISPLAY MEAS-RESULT- OUT NO
6SHOW BINARY IMAGE YES NO
7
YES NO
8DISPLAY + CURSOR NO YES
9OBJ.NO.MANL MODE NO YES
0IMAGE DISPLAY
FREEZE THROUGH
qUPPER MENU
0IMAGE DISPLAY
Measurements can be made on a frozen image.
FREEZE
Measurements can be made on a frozen image.
THROUGH
[POWER ON SETTINGS]
1MAIN OPS MENU
UNLOCK LOCK
2OPERATION
1 MAIN OPS
MENU
All of the operating conditions for the
UNLOCK
IV-S20 can be changed.
The MAIN OPS MENU is locked and
LOCK
no change can be made.
(TYPE00) AREA1
OK
MEAS. XXXXXXms
MEAS0 CAM1 POS-DEVIATION
MANL-MESR
Contents
Description
F L C1ALLC2NO
LOCK VX.X
8-10
"LOCK" will be
displayed on the
MAIN OPS MENU.
Advertisement
Table of Contents
