Table of Contents
Advertisement
Positional deviation measurement
Continued from the previous page
Pressing the TRG/BRT key will display the results of a positional deviation measurement for the new
image that you have recorded.
Shown below is the display when a 2 point search has been specified.
[Display of the measured
results]
Final evaluation result
Measuring time
Registration number
Detection coordinates in the
reference image for model 0
Amount of deviation from
the reference image for model 0
Degree of match with the
reference image for model 0
Only displayed for a 2 point search
Detection coordinates in the
reference image for model 1
Amount of deviation from
the reference image for model 1
Degree of match with the
reference image for model 1
· By moving the cursor to REG-CHNG (change registration), and pressing the up key, it is possible to see
the measurement results for different registration numbers and numerical calculations. This is done by
scrolling through them in this order: registration numbers 0 1 2 3...7. These are followed by the
results of the numerical calculations N00 to N15. The measurements screen also has this feature.
Pressing the down key in these situations will scroll back through the results in the opposite order.
· Unregistered numbers will be skipped.
9
· When there are no recorded numbers (other than those currently on display) or if no measurement has
actually been carried out, then it will not be possible to scroll through the data.
· The displays for other modes are as follows.
(1-point search)
REGST NO. 0(0~7)
X COORD.(MDL0) X=176.0 OK
Y COORD.(MDL0) Y=322.0 OK
X DEVIAT (MDL0) X=+000.0 OK
Y DEVIAT (MDL0) Y=+000.0 OK
MATCH (MDL0)
(1-point edge)
REGST NO. 0(0~7)
X COORD.(MDL0) X=176.0 OK
Y COORD.(MDL0) Y=322.0 OK
X DEVIAT (MDL0) X=+000.0 OK
Y DEVIAT (MDL0) Y=+000.0 OK
(TYPE00)
OK
MEAS. XXXXXXms
MEAS0 CAM1 POS-DEVIATION
REGST NO. 0(0~7)
X COORD.(MDL0) X=176.0 OK
Y COORD.(MDL0) Y=322.0 OK
X DEVIAT (MDL0) X=+000.0 OK
Y DEVIAT (MDL0) Y=+000.0 OK
MATCH (MDL0)
ANGULAR DEVIT
X COORD.(MDL1) X=534.0 OK
Y COORD.(MDL1) Y=480.0 OK
X DEVIAT (MDL1) X=+001.0 OK
Y DEVIAT (MDL1) Y=+001.0 OK
MATCH (MDL1)
X0~6
:
MSR-CHNG REG-CHNG PC-MONTR SET-SCRN MANL-TYP-CHG
(1-point search + 1-point edge)
+10000 OK
(2-point edge)
+10000 OK
+001.7 OK
+09999 OK
Y0~7
:
REGST NO. 0(0~7)
X COORD.(MDL0) X=176.0 OK
Y COORD.(MDL0) Y=322.0 OK
X DEVIAT (MDL0) X=+000.0 OK
Y DEVIAT (MDL0) Y=+000.0 OK
MATCH (MDL0)
+10000 OK
ANGULAR DEVIT
+001.7 OK
X COORD.(MDL1) X=534.0 OK
Y COORD.(MDL1) Y=480.0 OK
X DEVIAT (MDL1) X=+001.0 OK
Y DEVIAT (MDL1) Y=+001.0 OK
REGST NO. 0(0~7)
X COORD.(MDL0) X=176.0 OK
Y COORD.(MDL0) Y=322.0 OK
X DEVIAT (MDL0) X=+000.0 OK
Y DEVIAT (MDL0) Y=+000.0 OK
ANGULAR DEVIT
+001.7 OK
X COORD.(MDL1) X=534.0 OK
Y COORD.(MDL1) Y=480.0 OK
X DEVIAT (MDL1) X=+001.0 OK
Y DEVIAT (MDL1) Y=+001.0 OK
9-44
F H C1ALLC2NO
VX.X
Model 1
Model 0
BUSY
:
Advertisement
Table of Contents
