Table of Contents
Advertisement
Operation Examples (Lead inspection)
Continued from the preceding page
5. Press the ESC key, move the cursor to 3 SEARCH AREA (search window) with the up and
down keys, and press the SET key.
6. Create a search window (dotted line) to be used as the search area.
- The search area is the area within which the new image will be searched for a match with
the image stored in step 3. The gray scale search function performs the search operation
(see "Glossary").
- The procedure for defining the search area is the same as in step 3.
3
7. After defining the search window size and position, press the ESC key.
8. Move the cursor to w UPPER MENU with the up and down keys, and press the SET key.
- The screen will return to the [MEASURING COND] (measurement condition) menu.
9. On the [MEASURING COND] menu, move the cursor to 3 OBJ NO.FOR MEAS with the up
and down keys, and press the SET key. Move the cursor to "YES" with the right and left keys,
and press the SET key.
- The items 4 and 5 will be displayed.
9
10
10. Move the cursor to 5 OBJ CONDFOR MEAS (object conditions) with the up and down keys,
and press the SET key.
- The object condition setting menu and a horizontal line will be displayed.
Continued on the following page
Search window
[MEASURING COND] (TYPE00-MEAS1-INSPECT LEAD)
1REGST.NO.
0(0~3) REG.NO YES
2SEARCH CRITERIA (TO NEXT SUB-MENU)
3OBJ NO. FOR MEAS CRT.0-0(0~7) REG.NO YES
4LEAD LENGTH MEAS NO YES
5OBJ CONDFOR MEAS (TO NEXT SUB-MENU)
6UPPER MENU
1DETECT MODE
CNTR(BRT DRK)
9
Horizontal line
3-34
Advertisement
Table of Contents
