Table of Contents
Advertisement
Continued from the preceding page
(3) Operation on the [OBJECT TYPE COND] (conditions of object type) menu
[OBJECT TYPE COND]
1OBJECT TYPE NO.
2EDIT
3TITLE REGISTRATION (TO NEXT SUB-MENU)
4MEAS.0, CAMERA1
5POS. ADJ.CAMERA1
6MEAS.0, CAMERA2
7POS. ADJ.CAMERA2
8SELECT CAMERA IMG NO CAM1 CAM1 CAM1&2
0MEASUREMENT 1
1
qMEASUREMENT 2
wMEASUREMENT 3
eFINAL CALC RESULT
rFINAL OUTPUT COND (TO NEXT SUB-MENU)
tSYSTEM-IN/OUT
yHALT MEAS ON NG
uUPPER MENU
1. Move the cursor to 0 MEASUREMENT 1 with the up and down keys, and press the SET key.
- The [TYPE00-MEAS1] (type: 00, measurement: 1) menu will be displayed.
(4) Operation on the [TYPE00-MEAS1] menu
[TYPE00-MEAS1]
1MEAS SELECTION NO
1
2
3SELECT CAMERA CAM1 CAM2
4COPY
5INITIALIZATION
6MEAS.PROG. COND (TO NEXT SUB-MENU)
7EVALUATION COND (TO NEXT SUB-MENU)
3
8NUMERIC CALC COND (TO NEXT SUB-MENU)
9OUTPUT CONDITIONS (TO NEXT SUB-MENU)
0UPPER MENU
1. Move the cursor to 1 MEAS SELECTION (select measurement) with the up and down keys,
and press the SET key.
2. Move the cursor to POINT MEAS (point measurement) with the left and right keys, and press
the SET key.
3. Move the cursor to 6 MES.PRG.COND (conditions of measurement program) with the up
and down keys, and press the SET key.
- The [MEASURING COND] (measurement condition) menu will be displayed.
Continued on the following page
F C1 H
00(0~15)
COPY(
TYPE00) INITIALIZE
NO (TO NEXT SUB-MENU)
NO ADJ. [REG. 0-1PNTSXY
NO (TO NEXT SUB-MENU)
NO ADJ. [REG. 0-1PNTSXY
NO (TO NEXT SUB-MENU)
NO (TO NEXT SUB-MENU)
NO (TO NEXT SUB-MENU)
(TO NEXT SUB-MENU)
(TO NEXT SUB-MENU)
NO YES
CHECK-DEG-OF-MATCH
DST&AGL MES. (GRAY&EDGE GRAV)
INSPECT-LEAD MEASR-BIN-AREA
CNT-BIN-OBJ LABEL-BIN-OBJ
POINT MEAS
EXEC TYPE00 MEAS1 NO
EXEC
3-39
Operation Examples (Point measurement)
3
Advertisement
Table of Contents
