Sharp IV-S20 User Manual page 232

Continued from the previous page
[NUMERIC CALC] (TYPE00-MEAS.1-CNT-BIN-OBJ)
1CALC.RESULT N00(0~15)
2OBJECT TYPE NO T-AREA[A] QTY[K] NUM-CALC[NC] CNST[C]
3FORMULA
4UPPER&LOWER LIMIT +00000000.0~+00000000.0
5OUTPUT
6RUN A TEST
7UPPER MENU
00A
N00 [A]
+00009000.0~ +00010000.0
N01
N02
N03
Numerical calculation
1CALC.RESULT
(calculation result)
2OBJECT TYPE (type)
3FORMULA
4UPPER&LOWER LIMIT
5OUTPUT
6
TEST RUN
(make a test run)
7UPPER MENU
· The number of formulas which can be set are dictated by the selections made in items 2 and 3
as follows.
Total area [A]
Numerical calculation [NC]
Constant [C]
The numbers ranging from 00 to 15 in front of the characters are registration numbers.
· For more information on numerical calculations see section 9-2 [4] Numerical calculations.
Note: You must run a test using item 6 RUN A TEST before making any calculations.
Return to the [TYPE00-MEAS1 to 3] menu and select item 9 OUTPUT CONDITIONS.
Continued on the following page
REG.00(0~15) N00(0~15)
+ - ∗
/ DEL. END
NO Y0(0~7) C000(0~107)
(SET KEY)
See the recording and display the results from arithmetical operation for
specified output data at any value from 00 to 15.
Select the type of data being calculated.
A number of formula settings are used.
The first line will change according to the selection made in item 2.
Selection of 2
Total area [A]
Number of objects [K]
Numerical calculations [NC]
Constant [C]
Note: Please use a smaller number for the number of formulas at N (00 to 15)
than that used for 1 CALC.RESULT N (00 to 15).
Set the upper and lower limits for decisions.
Set the evaluation output for the results of the calculations.
Pressing the SET key will record the settings details as well as run a test.
Returns you to the [TYPE00-MEAS1 to 3] menu.
2OBJECT TYPE
9-95
Counting quantities by binary convension
Y0
00009500.0 OK
Setting details
The first line of the display
Record 00 (0 to 15) N00 (0 to 15)
ABS
(the second line will not be displayed)
+00000000.0 (the second line will not
be displayed)
Number of formulas
00A to 15A
ABS/ /TAN/ATAN (00 to 15)
-99999999.9 to +99999999.9
TAN ATAN N00 (0 to 15)
9