Table of Contents
Advertisement
Object identification (labeling) by binary conversion
Continued from the previous page
[NUMERIC CALC] (TYPE00-MEAS.1-LABEL-BIN-OBJ)
1CALC.RESULT N00(0~15)
2OBJECT TYPE NO T-AREA[A] QTY[K] OBJ-AREA[R]
3FORMULA
4UPPER&LOWER LIMIT 00000000.0
5OUTPUT
6RUN A TEST
7UPPER MENU
N00
N01
N02
N03
Numerical
calculation
1 CALC.RESULT
(calculation result)
2 OBJECT TYPE (type) Select the type of data being calculated.
9
3 FORMULA
4 UPPER&LOWER LIMIT
5 OUTPUT
6 RUN A TEST
(make a test run)
7 UPPER MENU
· The number of formulas which can be set are dictated by the selections made in items
Total area [A] / number of objects [K]
Center of gravity by label [GX]/[GY]
Main axis angle of each label [B],
Fillet width of each label [FX]/[FY]
· For more information on numerical calculations see section 9-2 [4] Numerical calculations.
Note: You must run a test using item 6 RUN A TEST, before making any calculations.
Return to the [TYPE00-MEAS1 to 3] menu and select item 9 OUTPUT CONDITIONS.
Continued on the following page
OBJ-GRAVTY[GX GY] OBJ-ANGLE[B]
OBJ-FILLET[FX FY] OBJ-PERIMETR[CR]
NUM-CALC[NC] CNST[C]
REG.0(0~3) LABL000(0~127) N00(0~15)
+ - ∗
/
DEL. END
00000000.0
NO Y0(0~7) C000(0~107)
(SET KEY)
0R000
[R]
+00001950.0~ +00002050.0
See the recording and display the results from arithmetical operation for specified
data at any value from 00 to 15.
A number of formula settings are used.
The first line will change according to the selection made in item 2.
Selection of 2
Total area [A] number of objects [K] Registration 0 (0 to 3), N00 (0 to 15)
Area by label [R]
Center of gravity by label [GX, GY]
Main axis angle of label [B]
Fillet width by label [FX, FY]
Circumference by label [CR]
Numerical calculation [NC]
Constant [C]
Note: Please use a smaller number for the number of formulas at N (00 to 15) than
that used for 1 CALC. RESULT N (00 to 15).
Set the upper and lower limits for decisions.
Set the evaluation output for the results of the calculations.
Pressing the SET key will record the settings details as well as run a test.
Returns you to the [TYPE00-MEAS1 to 3] menu.
2 Type
Area per label [R],
Perimeter of each label [CR]
Numerical calculation [NC]
Constant [C]
The numbers ranging from 0 to 3 in front of the characters are registration numbers.
Y0
00002000.0
OK
Setting details
The first line of the display
Registration 0 (0 to 3), Label 000 (0 to 127),
N00 (0 to 15)
ABS √ TAN ATAN N00 (0 to 15)
(The second line is not be displayed.)
+00000000.0 (The second line is not be displayed.)
Mathematical expression
0A
3A/0K
0R000 to 3R127, 0GX000 to 3GX127/0GY000 to 3GY127
0B000 to 3B127, 0FX000 to 0FX127/0FY000 to 0FY127
0CR000 to 3CR127
ABS/ /TAN/ATAN (00 to 15)
99999999.9 to
9-104
and
as follows.
3K
99999999.9
Advertisement
Table of Contents
