Configuring ACLs (Web)
This section provides information about the OpenManage Switch
Administrator pages for configuring and monitoring ACLs on a Dell
Networking N2000, N3000, and N4000 series switches. For details about the
fields on a page, click
IP ACL Configuration
Use the IP ACL Configuration page to add or remove IP-based ACLs.
To display the IP ACL Configuration page, click Switching → Network
Security → Access Control Lists → IP Access Control Lists →
Configuration in the navigation panel.
Figure 20-1. IP ACL Configuration
Adding an IPv4 ACL
To add an IPv4 ACL:
1 Open the IP ACL Configuration page.
2 Click Add to display the Add IP ACL page.
3 Specify an ACL name.
at the top of the page.
Configuring Access Control Lists
599