Running A Manual Weight Entry Job; Running An Attached Scale Job - Pitney Bowes Connect+ 500W Operator's Manual

Chapter 3
Manual weight entry (optional)
l
NOTE: If your system does not have optional WEIGH-ON-THE-WAY® (W-O-W®) or
Manual weight entry option, you need to select the Attached scale method.
4. Select OK.
NOTE: If you are running mail with mixed sizes and weights, refer to How do I run mail that
has different sizes and weights.

Running a Manual Weight Entry Job

When you need to use a scale that is not connected to your system, you can still use the sys-
tem to calculate the postage for you.
1. Select the Run Mail button from the Home screen.
2. Select a job that uses Manual weight entry.
3. Place the mail piece on the detached scale and note its weight.
4. Select the Weighing icon.
a. Ensure the Manual weight entry option is selected.
b. If necessary, change the weighing units.
c. Enter the mail piece weight.
d. Select OK to go back to the Run Mail screen.
5. Select the class of service.
6. Put the mail on the feed deck.
7. Select Start, or if printing to tape, select Tape.

Running an Attached Scale Job

If you have a large mail piece that cannot be fed through your machine and you have an
attached scale, use the Attached Scale method. Note that the system will automatically
select this method if you place a piece of mail on your attached scale. It will also display the
weight of the mail piece next to the Weighing icon on the Run Mail screen. If the scale is not
set to zero when there is no weight on the scale you can reset it to zero.
58
SV62589 Rev. C