Bat300 Types; Bat-Bg/Bgn Types; Other Features - Hirschmann BAT54-F User Manual

1.1.4

BAT300 types

The BAT300 is a dual-band industrial high-performance wireless LAN
access point/access client in accordance with IEEE 802.11a/b/g/h and
802.11n (draft 2.0). The devices provide a higher radio output with a
bandwidth of up to 300 Mbit/s. They support MIMO (Multiple Input Multiple
Output) and Multipath. The bandwidth is increased by using the multipath
transmission by means of reflections. Three antennas for sending and
receiving ensure more stable network coverage with fewer shadow areas
(see following figure).
BAT300-Rail
Figure 1: Schematic representation of MIMO (Multiple Input Multiple Output)
1.1.5

BAT-BG/BGN types

BAT-BG/BGN devices only support the use of the
2.4 GHz ISM wave band.
Note: Note that the function descriptions for the BAT-BG/BGN devices in this
installation guide and in the user manuals for the devices only apply to
operation with 2.4 GHz.
Hirschmann supports you by providing country profiles. These profiles help
you to conform to the requirements of the country in which you are operating
the WLAN installation.
Make sure you always set the correct country profile.
1.1.6

Other features

Features can be managed via a Web browser, via Telnet, with a
management software product (such as ConneXview) or locally on the
device (V.24 interface).
The devices provide high mobility combined with maximum security.
16
BAT-F, BAT-Rail, BAT54, BAT300
Release 02 07/10