Description; General Device Description; Device Name And Product Code - Hirschmann BAT450-F User Manual

1

Description

1.1

General device description

The devices are wireless LAN access points or clients complying with
IEEE 802.11a/b/g/h/n. They provide a high radio output with a data rate of up
to 450 Mbit/s. The devices support MIMO (Multiple Input Multiple Output) and
Multipath. The data rate is increased by using the multipath transmission by
means of reflections.
Devices with LTE function allow you to establish 3G data communication or
4G data communication via a public cellular network. Devices with LTE
function have integrated a GPS receiver and a GLONASS receiver for
position determination.
You have numerous options of combining the device characteristics. You can
determine the possible combinations using the Configurator which is
available in the Belden E-Catalog
the web page of the device.
There are convenient options for managing the device. Administer your
devices via:

a Web browser
 SSH
 Telnet
 HiDiscovery (Software for putting the device into operation)
 Management software (e.g. Industrial HiVision, LANconfig/LANmonitor)
 a V.24 interface (locally on the device)
The devices work without a fan.
The devices comply with the degrees of protection IP65/67.
1.2

Device name and product code

The device name corresponds to the product code. The product code is
made up of characteristics with defined positions. The characteristic values
stand for specific product properties.
Installation BAT450-F
Release 06 08/2017
(www.e-catalog.beldensolutions.com) on
15