Wlan Specifications; Radio Technology; Roaming; Receive Sensitivity, Transmission Power And Data Rate According To Ieee 802.11A/B/G/N - Hirschmann BAT450-F User Manual

Installation industrial access point / client / access bridge
Hide thumbs Also See for BAT450-F:
Table of Contents

Advertisement

11.3

WLAN specifications

11.3.1

Radio technology

Antenna connection
Range
Encryption
Frequency range
Modulation technology
Radio topology
a. With encryptions of the type TKIP and WEP, the device falls back on IEEE 802.11b/g or
IEEE 802.11a.
b. With encryptions of the type TKIP and WEP, the device falls back on IEEE 802.11b/g or
IEEE 802.11a.
c. With encryptions of the type TKIP and WEP, the device falls back on IEEE 802.11b/g or
IEEE 802.11a.
d. With encryptions of the type TKIP and WEP, the device falls back on IEEE 802.11b/g or
IEEE 802.11a.
11.3.2

Roaming

IEEE 802.11F (Inter-Access Point Protocol)
IEEE 802.11r (Fast Roaming)
PMK caching
Pre authentification
OKC (Opportunistic key caching)
11.3.3
Receive sensitivity, transmission power and data
rate according to IEEE 802.11a/b/g/n
The values shown in the following tables show maximum values of the WLAN
module version for high-gain antennas. The values are in no case to be
perceived as a guaranteed property of the overall product. In some country
profiles, the module automatically reduces the data rate and transmit power
downward. This is due to national standards.
IEEE 802.11a/b/g/n
Data rate
6 Mbit/s
46
For each WLAN module: 3 × N socket
Depending on the antenna used, frequency range and data rate
IEEE 802.11i/WPA2 with passphrase or IEEE 802.1x and
hardware-accelerated AES
Closed Network
a
WEP 64
b
WEP 128
c
WEP 152
User authentication
802.1x/EAP
LEPS
d
WPA1/TKIP
For more information, see the HiLCOS data sheet.
Support of 2.4 GHz and 5 GHz: 2412 MHz to 2472 MHz and
5180 MHz to 5825 MHz
OFDM: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
DSSS/CCK
WLAN Access-Point, Bridge-, Router-, Point-to-Point-, Client-, Client-
Bridge-Mode
Typical transmission power
16 dBm
Typical receiving sensitivity
−93 dBm
Installation BAT450-F
Release 06 08/2017

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents