Table of Contents
Advertisement
– LLDP - Link Layer Discovery Protocol service.
– CDP - Cisco Discovery Protocol
– MNDP - MikroTik Neighbor Discovery Protocol
Device information can include information such as Chassis ID, Port ID, Management IPv4 address,
Management IPv6 address, System name, System description and VLAN ID.
SNMP Services
Simple Network Management Protocol (SNMP) is a protocol for collecting and organizing information
about managed devices on IP networks. SNMP service allows the SNMP manager to access the
information collected on the device.
AP3400 enables the use of SNMPv2 and SNMPv3 versions of the protocol.
– SNMPv2 - Community - the SNMP community string is used as an authentication means for
accessing the SNMP service on the board.
– SNMPv3 -User and password - in SNMPv3 username and password are used to authenticate
the remote access to the SNMP service on board.
– SNMPv2 + SNMPv3 - If this protocol is chosen, both authentication methods will be used.
SNMP Traps
SNMP traps allow the device to automatically send the collected information to the management
server. Monitored device (SNMP agent) sends the messages in a form of traps to the destination
(server).
AP3400
Figure 5.34.: SNMP service tab
46
User Manual for version 1.9.1
Advertisement
Table of Contents
