General Information - Teletek electronics ECLIPSE 8 User's Operation Manual

1. GENERAL INFORMATION

ECLIPSE Series are control panels providing security and management of small and
medium residential or office sites.
The ECLIPSE family includes:

ECLIPSE 8 for management of small sites up to 8 zones organized in 1 common
area and for up to 8 users.

ECLIPSE 16 for management of small to medium sites up to 16 zones organized in 3
independent areas and for up to 32 users.

ECLIPSE 32 for management of medium sites up to 32 zones and 8 independent
areas and for up to 64 users.

ECLIPSE 99 for management of large sites up to 99 zones and 16 independent
areas and for up to 99 users.
In ECLIPSE Series control panels are available two types of users: Managers and
Regular users of the system. The Managers have extended rights for programming of
special system menus and the regular users have limited rights for operation with the
system.
Manager of the system can be every user, who has been granted manager rights. User 1
is the Chief Manager and his/her rights cannot be changed. The users can be granted
manager rights by the Engineer of the system, as well as by another Manager of the
system with programming rights.
The Manager programming is structured as text menus or 2-digit addresses*.
The User programming is structured as text menus 1-digit address*.
*Note: The type of programming is set from the engineer on the site.
Entrance in the manager menu is possible even when the system is armed, but there are
certain limitations, for example zones cannot be bypassed in armed mode.
It is possible to enter in manager programming menus from several keyboards at a time
using the same manager access code.
The structure of Manager and User programming menus is as follow:
Access
Code
Note: The presented into this manual information is for User operation via LCD keyboard
and set text menus, or LED keyboard.
Before starting any programming or changing the system parameters,
you should read carefully the provided detailed information for each
menu and make sure that you understand the descriptions.
Keep this manual in safe place and refer to the instructions every time
you are about to program or change system parameters and settings.
ECLIPSE 8/16/32/99 Series – User Operation Manual
Programming
Select text menu or
menus
enter an address
Submenu/
Settings
5
Confirm