Gear Position Sensor Inspection (Gps: Gear Position Sensor) - Husqvarna 2011 TE 630 Workshop Manual

Gear position sensor inspection (GPS: Gear Position Sensor)

Set the meter to the "Ohm" scale and disconnect the alternator six-way connector
(1) from the main wiring harness. Touch one meter probe to engine ground and
insert the other probe into the connector hole for the WHITE/BLACK gear sensor
wire (2). The lever (3) is placed on the left-hand side of the engine. After each
gear shift, it automatically returns to the horizontal position. First gear is engaged
by pushing the lever downwards; for other gears push it upwards. Check the
readings provided in the relevant table.
A NEUTRAL
B 1st
C 2nd
D 3rd
E 4th
F 5th
G 6th
Part. N. 8000 H2051 (02-2010)
ELECTRICAL SYSTEM
312-319
725-739
1.31-1.34
2.18-2.23 K
3.61-3.68 K
6.58-6.71 K
15.2-15.5 K
M.23
3
H006015