Headlamp Fairing Removal - Husqvarna 2011 TE 630 Workshop Manual

Headlamp fairing removal.

- Remove headlamp, front mudguard and digital dashboard as outlined in the
relevant paragraphs.
- Disconnect the diagnostic connector (1).
- Loosen the three screws (2) using an 8 mm ring wrench, open the clamp (3),
slip off brake and trip meter cables and remove headlamp fairing (4).
On assembly, make sure to position bushing (5) and rubbers (6)
correctly.
Part. N. 8000 H2051 (02-2010)
GENERAL PROCEDURES
2
5
6
4
6
2
H01190
E.29