Big End Radial Clearance; Balancing Countershaft - Husqvarna 2011 TE 630 Workshop Manual

ENGINE OVERHAUL

Big end radial clearance

STANDARD
0.02-0.028 mm
(0.0008-0.00112 in.)
Big end radial clearance
STANDARD
0.50-0.70 mm
(0.0197-0.0275 in.)

Balancing countershaft

Clamp the countershaft between centres and check that journals run concentric
using a dial gauge (maximum runout allowed 0.02 mm).
Measure diameters A,B,C and D:
ØA wear limit = 16.945 mm.
ØB wear limit = 19.965 mm.
ØC wear limit = 19.965 mm.
ØD wear limit = 19.960 mm.
G.16
WEAR LIMIT
0.04 mm
(0.0016 in)
WEAR LIMIT
0.080 mm
(0.00315 in)
Part. N. 8000 H2051 (02-2010)