Connectors; Couplers - Husqvarna 2011 TE 630 Workshop Manual

CONNECTORS

• When connecting a connector, push until you hear a click.
• Check connector for signs of corrosion or dirt and inspect its cover for
damage.

COuPLERS

• When working with lock-type couplers, make sure to release the lock befo-
re disconnecting and push coupler fully in when connecting it.
• When disconnecting the connector, make sure to grab connector body and
do not pull on the wires.
• Check coupler terminals to ensure they are not loose or bent.
• Check terminals for signs of corrosion or dirt.
Part. N. 8000 H2051 (02-2010)
ELECTRICAL SYSTEM
M.37