Fuel Tank Removal - Husqvarna 2011 TE 630 Workshop Manual

Fuel tank removal

- Remove the saddle as described in the relevant paragraph.
- Close both fuel cocks (1)
- Use a 6 mm Allen wrench to loosen the screw (2) and remove the screw with
its spacer.
- Place a vessel under the R.H. cock to collect fuel.
- Loosen clamp (3) and disconnect tube (4) from the fuel cock. Let the fuel
drain out.
Part. N. 8000 H2051 (02-2010)
GENERAL PROCEDURES
E.17